Miota Technologies and Engineering Solutions

Heating at –30°C

Specific optimization of the refrigerant circuit and compressor management, enabling operation at outdoor temperatures down to –30°C while maintaining stable heating capacity.

Intelligent On-Demand Defrosting

Unlike conventional defrosting at fixed time intervals, the algorithm analyzes data from temperature sensors and system operating parameters, and initiates a defrost cycle only when ice has actually built up. This minimizes interruptions to heating mode.

Electric Heater

A factory-integrated electric heater in the outdoor unit chassis. Ensures unobstructed water drainage during the defrost cycle and protects the base and fan from icing at sub-zero temperatures.

Outdoor Unit Snow Self-Cleaning

The air conditioner detects whether snow has accumulated on the outdoor unit’s heat exchanger and reverses the fan direction to restore heat exchanger capacity by blowing away the accumulated snow.

Holiday Mode / 10°C Anti-Freeze

A function for maintaining a minimum room temperature of 10°C. Used to protect plumbing installations and the building structure from freezing during the winter season at minimal energy consumption.

Super Quiet Operating Mode

Thanks to the integrated chassis and fan design, Miota air conditioners are exceptionally quiet. In the indoor unit’s quiet fan mode, they reach sound pressure levels as low as 18dB.

Smart “Follow Me” Function

Works in conjunction with the PIR sensor, adjusting the louver angle and directing airflow toward the zone where presence has been detected.

Smart “Avoid Me” Function

The algorithm uses data from the PIR sensor to determine the position of people and deflects the airflow in the opposite direction.

3D Airflow

Synchronized control of the horizontal and vertical louvers ensures volumetric distribution of airflow throughout the entire room.

5-Speed Fan Control

Step-by-step control of the DC motor allows precise regulation of airflow — from maximum power (Turbo) to quiet mode for comfortable operation.

3-Phase Water Self-Cleaning

The self-cleaning process uses the moisture that the air conditioner naturally extracts from the air during operation. During cooling, the evaporator operates below the dew point and water vapor from the room condenses on the fins, forming a uniform water film across the entire heat exchanger.

The system then lowers the temperature further, causing this water layer to freeze. As it transitions from liquid to solid phase, the volume expands and the ice separates dust and organic particles that have adhered to the fin surfaces.

Finally, the air conditioner enters a brief, controlled defrost phase. The ice layer melts evenly and the resulting water flushes away the loosened contaminants, which are carried off through the drainage system. The process uses only the moisture captured from the air — no chemicals and no mechanical cleaning required.

UVC Module

An integrated ultraviolet radiation source in the UV-C spectrum. Irradiates the passing airflow and the surface of the heat exchanger, deactivating the DNA/RNA structure of pathogens, viruses, and bacteria, in accordance with laboratory-certified parameters.

Thermal Disinfection

A dedicated mode heats the indoor heat exchanger and maintains a high temperature for a set period of time, eliminating bacteria and organic buildup.

Coanda Airflow

An aerodynamic louver profile that utilizes the Coanda effect. During cooling, the airstream is directed closely along the ceiling, and during heating — vertically toward the floor, providing smooth convection and uniform temperature distribution.

Comfortable Sleep

The algorithm gradually adjusts the set temperature and reduces fan speed, ensuring optimal acoustic and thermal comfort throughout the night.